Specifications

• 16 x 4 gated step sequencer
• Arpeggiator
• 2 digitally controlled analog oscillators (DCOs) per voice with selectable sawtooth, triangle, saw/triangle mix, and pulse waves (with pulse-width modulation), and hard sync.
• White noise generator
• 1 Analog Curtis low-pass filter per voice, selectable 2- and 4-pole operation (self-resonating in 4-pole mode).
• 3 Envelope Generators: filter, VCA, and assignable (four-stage ADSR + delay); Envelope 3 can loop.
• 4 LFOs
• Glide (portamento): separate rates per oscillator.
• Analog VCAs
• Dimensions: 3.25" H X 18.5" L x 7" W (8.25 cm x 47 cm x 17.8 cm)
• Weight: 8.5 lbs. (3.86 kg)
• Rack mounted: 4U*

Ins and Outs

• MIDI In, Out, Thru, and Poly Chain
• Main stereo audio output: 1/4" unbalanced
• Output B stereo audio output: 1/4" unbalanced
• Sustain pedal input: accepts normally on or normally off momentary footswitch.
• Pedal/CV input: responds to expression pedals or control voltages ranging from 0 to 5 VDC (protected against higher or negative voltages).
• Headphone output: 1/4" stereo phone jack.

Includes power supply for 110V – 240V AC operation (13-15 VDC, 400 mA) and operation manual.

For more information, download the operation manual (Prophet _08_Manual_v1.1.pdf, 831 kB).

*The input and output jacks are on the back panel, so they are on top when the module is rack mounted. The jacks are recessed about 1" but we recommend using cables with angled MIDI and audio plugs to avoid interfering with the rack space above the module.

Overview | Specifications | Audio | Video | Photos | Where to Buy